TESCOM™ 26-2000 Series Relief Regulators

TESCOM™ 26 – 2000 Series Bleed Regulators
The 26 – 2000 series high – pressure, low – flow piston – sensed regulators are available in air – loaded, spring – loaded, and gas – loaded models. This regulator features a separable and recoverable bleed design, with a rated inlet pressure of 6000 – 15,000 psig / 413 – 1034 bar. It is highly suitable for R & D laboratories, pressure filling, calibration testing, burst strength testers, component testing, and high – pressure hydraulic or pneumatic applications.

Specifications
– Pressure Ratings: Maximum inlet and outlet pressures: Please refer to the part number selector.
– Materials:
– Body: 316 stainless steel or brass.
– Seat, bleed orifice, main valve, O – rings: Please refer to the part number selector.
– Backup rings: Teflon®.
– Filters:
– 26 – 201XX – XX: Brass.
– 26 – 202XX – XX: 300 series stainless steel.
– Other Components: 316 stainless steel and 17 – 4 stainless steel.
– Operating Temperature: – 15°F to 165°F / – 26°C to 73°C.
– Port Sizes and Types: 1/4″, 3/8″, 1/2″; SAE, NPTF, MS33649, High – pressure/Aminco, Medium – pressure/Slimline; Bleed ports: 1/4″ SAE, 1/4″ NPTF, 1/4″ MS33649.
– Flow Capacity: Cv = 0.02, 0.06, 0.12 or 0.30.
– Load Types: Spring, air chamber, air.
– Weight (Approximate): 5.5 lb / 2.5 kg.

Features
– Separable and recoverable bleed is the standard method.
– Three standard load methods – spring, air chamber, and pneumatic.
– Utilizes soft seats and metal – to – metal seats.
– A standard 40 – micron internal filter (soft seat models) can extend service life.
– Offers a high – flow type with a Cv value of 0.30.
– Performs best when used with the TESCOM ER5000 electro – pneumatic controller.