The R100 series pressure regulators are widely used as medium - and high - pressure regulators in gas transmission and distribution systems, gas pipelines, and industrial gas pressure regulation systems.

The predecessor of R100 - R064 has been successfully applied worldwide for over 25 years. It has won the recognition of global users with its high quality and wide applicability. Compared with R064, R100 is a new - generation product that has been significantly improved and perfected using modern technology on its basis.

R100 is a pilot - controlled pressure regulator, featuring high regulation precision. Meanwhile, it has the characteristics of a direct - acting pressure regulator and an extremely fast response speed.

The R100 series pressure regulators mainly include the following models:

All standard - type pressure regulators in the R100 series are equipped with a pilot. The maximum allowable inlet pressure of the pilot can reach 100 bar, and the outlet pressure range is 0.5 - 60 bar (inclusive).

The R100(S) pressure regulator is developed by adding a mouse - cage type silencer to the R100. Its noise reduction can reach 40 dB(A). The specially - made noise reduction device can effectively reduce noise to meet the requirements of the R100 noise standard. Except for the added mouse - cage type silencer, the structure of R100(S) is completely the same as that of the standard - type R100 pressure regulator. According to customer needs, it can meet higher outlet pressure requirements.

The R100(S) - M pressure regulator can be used with a fully - open monitor. Compared with traditional safety devices such as safety cut - off devices or safety relief devices, the advantage of the R100(S) - M pressure regulator is that when the main pressure regulator fails, the monitor can be used as an emergency pressure regulator, so that the gas supply will not be interrupted, thus greatly improving the reliability of the equipment. The structural working principle of this pressure regulator is similar to that of the standard - type R100 pressure regulator. However, the R100(S) - M pressure regulator has unique performance, such as fast response speed, low closing pressure, high precision, and good stability. Compared with other fully - open monitors in the same series, it has unique advantages. Its monitor can be equipped with an acceleration pilot to further improve the response speed. At the same time, a silencer can be optionally installed (for R100(S) - M type or R100 - M type).

The R101(S) pressure regulator is developed by adding a composite mouse - cage type silencer to the R100 pressure regulator. The advantage of this silencer is that it can effectively reduce noise without affecting the flow rate. Usually, installing an ordinary silencer will reduce the flow rate of the valve core of the pressure regulator. Therefore, if the user requires that the noise is low while reaching the specified flow rate under different inlet pressure conditions, a pressure regulator with a larger nominal diameter is usually required. The composite mouse - cage type silencer developed by the company and the patented noise reduction technology well solve this contradiction. Even when the inlet pressure of the gas and the flow rate are both low, the maximum flow rate of the gas can pass through the pressure regulator with the smallest nominal diameter, and noise reduction is achieved at the same time. This also avoids increasing the user's equipment investment due to the use of a larger - sized pressure regulator.